Prinmuls MP90X
Prinmuls MP90X is a BBA HAPAS approved super premium grade polymer modified bitumen emulsion with a high binder content. Specifically designed for use as a heavy duty surface dressing binder on high speed and heavily trafficked roads.
Prinmuls MP90X is suitable for use on higher stressed, heavier trafficked sites as a super-premium grade surface dressing binder as specified in the Design Guide for Road Surface Dressing, Road Note 39.
Please refer to the Road Surface Treatment Association’s (RSTA)/ADEPT Code of Practice for Surface Dressing Part 5 – Surface Preparation.
Prinmuls MP90 should be applied at a temperature of 85°C through a bulk binder distributor which has been tested for compliance to BS 1707 (hot binder distributors for surface dressing).
The surface dressing works should be in accordance with the recommendations contained in Design Guide for Road Surface Dressing, Road Note 39 and the RSTA’s Codes of Practice for Surface Dressing.
Due to high residual binder viscosity, optimum results are obtained with Prinmuls MP90 during the warmer months of May to August.
Refer to the Design Guide for Road Surface Dressing, Road Note 39 or contact your local Colas depot or representative for further guidance.
Supplied in bulk loads.
Prinmuls MP90X should be stored at 85°C in a purpose-built bulk storage tank or spray tanker and circulated daily. For further information please refer to BS434-2 2006 clause 5.2 storage.
Prinmuls MP90X is a CE Marked cationic bitumen emulsion to BS EN13808:2013 C70BPF2/3/4.
Prinmuls MP90X complies with the requirements of Road Note 39, Design Guide for Road Surface Dressing as a Super Premium Grade surface dressing binder.
Emulsion
| Binder Content (EN1428) | ≥69 (Class 10) |
| Efflux 4 mm @ 40ºC (EN 12846-1) | 5 – 100 s (Class 5/6) |
| Water effect on binder adhesion (EN 13614) | ≥ 90 (Class 3) |
| Breaking behaviour (EN 13075-1) | 70 – 195 (Class 3/4) |
Recovered Binder
| Penetration @ 250ºC (EN 1426) | ≤ 220 (Class 5) |
| Softening point (EN 1427) | ≥ 50ºC (Class 4) |
| Cohesion by pendulum (EN 13588) | ≥ 1. 4 J/cm² (Class 2) |
Stage 1 durability – stabilised binder
| Durability of penetration @ 25ºC (EN 1426) | NPD |
| Durability of softening point (EN 1427) | NPD |
|
Durability of cohesion by pendulum (EN 13588) |
NPD |
Stage 2 durability – aged binder
| Durability of penetration @ 25ºC (EN 1426) | ≤ 150 (Class 5) |
| Durability of softening point (EN 1427) | NPD |
| Durability of cohesion by pendulum (EN 13588) | ≥ 1.4 J/cm² (Class 2) |
| Dangerous regulated substances | NPD |
For full safety information, please download the C6 Prinmuls MP90X Safety Data Sheet in the link available below on this page.
CE Marking Information C6 Prinmuls MP90X, Declaration of Performance C6 Prinmuls MP90X and BBA HAPAS H162PS1i2 - Bitumen Road Emulsions Certificate documents are also available to download on this page.
For further information please contact us using the contact details provided on the page.
