Colseal
Colseal is a pre-mixed slurry seal for sealing utility reinstatement and patch repairs. It is also ideal for sealing pre- surface dressing patches. It can also be used for covering score marks and for the treatment of driveways and pathways. It is available in black and red.
- Carriageways
- Footways
- Driveways
The surface should be clean, dry and free of any loose chippings/debris (the treatment and removal of any weeds and moss should be carried out prior to laying preparation). Use masking tape to protect any kerbs/ironwork etc. from being covered (this is to be removed when the surface is completely dry, after the whole application is complete).
Mix thoroughly before use using a drill paddle.
Pour onto the surface in manageable amounts and using a soft brush with handle or squeegee, spread evenly over the surface to the recommended thickness of approximately 1.5mm-2mm, promptly finishing this area in the same directional brush stroke.
If a thickness greater than approximately 1.5mm-2mm is required we recommend an additional application but it must be ensured that the first application is set fully before reapplying.
The material should be applied on a dry day at temperatures of 10 °C and rising with no possibility of rainfall. Setting times vary with temperature. At the recommended thickness setting times will be, at 25°C approximately 1-3 hours and at 10°C 3-6 hours.
1 x 25kg bag will cover approximately 10-14m² @ 1.5mm-2mm thickness, depending on surface texture.
Colseal is supplied in 25kg buckets (36 x 25kg per pallet) or cardboard boxes containing 40 x 25kg bags.
Store in a cool, dry place, protect from frost.
Supplied in accordance to ISO9001.
For full safety information, please request the Colseal Safety Data Sheet 152 using the contact information on this webpage.
